Works on all Evolis printers. Dualys 3 Firmware – v. This information applies to magnetic cards provided by Evolis but does not hold good for all manufacturers. It is mainly used to directly manage the resource and is provided by Evolis for exclusive use with its printers. In fact, printing will optimize colors only on a white background.

Uploader: Kazishakar
Date Added: 21 May 2007
File Size: 42.2 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 63323
Price: Free* [*Free Regsitration Required]

Compatible with Pebble, Dualys, and Securion Printer. The warranty period for Dualys3 and Pebble4 printers and print heads is 3 years.

What settings of the computer should I check before installing a driver? This guide is available on the Evolis CD-ROM shipped with the printer, or, it can also be downloaded from our website. Any product with the old serial number format eg: The driver must be installed before the duualys use of the printer and must be compatible with the target operating system. The dimensions of the card that will be used with the Evolis printer must be strictly respected.

This ribbon is useful and cost-effective if the color-printed area of your layout is no bigger than a logo or an ID picture. This issue may arise from a dirty or faulty print head.

Your questions about Dualys card printer | Evolis

If the issue remains even after checking these points, please contact your Evolis reseller or distributor. If this printer head is replaced, the limited warranty conditions of the wearable parts mentioned in this paragraph apply.


Make sure there is a color ribbon inside the printer. License for eMedia How to activate the license key in your eMedia software Is there a programming guide available? On the same theme: The difference between the standard YMCKO ribbon and the half-panel ribbon is in the Yellow, Magenta and Cyan panels which have a maximum length of 35 mm. White lines on the printed cards mean that the print head is unable to heat the ribbon in this zone: I need a spare part for my printer.

This information applies to magnetic cards provided by Evolis but does not hold good for all manufacturers. When dual-sided printing is selected, use the driver to configure the reverse side settings.

Check if the ribbon is not faulty replace it with a new one Are you using a genuine Evolis ribbon? Click here to access the previous Warranty Conditions. This Evolis printer is an exceptional ID card printer, allowing you to output vivid cards for identification. A firmware is a resident software, embedded in a flash memory on the main board and that operates as a layer between the hardware and the software. What are the driver settings for double-sided printing?


A technical test card will then be output to the printer, stating the current firmware version of the printer, as shown below:. Each print head has a specific part number.

I would like to upgrade my printer with encoding option s. Switching to a new PC, migration of the eMedia software environment How to activate the license key in your eMedia software Which software applications are compatible with Evolis printers?

FAQ Dualys

The upgrade can be done in the card designer itself when you are connected to the Internet. Dualys 3 – How to use the manual feeder? I need a spare part for my printer.

Hico stripes are black and Loco stripes are brown. Use a 5-panel or half-panel color ribbons. What’s more, featuring a utilitarian form factor, the Evolis Dualys 3 uses duwlys most effective amount of desk space necessary to get your printing jobs done.

International expertise A focus on international sales that makes Evolis what it is today. How many cards can I print with one ribbon?